Grandstream Networks HANDYTONE 486 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Routers Grandstream Networks HANDYTONE 486. Grandstream Networks HANDYTONE 486 User's Manual [en] Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir

Resumo do Conteúdo

Página 1 - User Manual

User Manual HandyTone-486 Analog Telephone Adaptor For Firmware Version 1.0.6.0 Grandstream Networks, Inc. www.grandstream.com

Página 2 - Table of Contents

HandyTone-486 User Manual Grandstream Networks, Inc. 10 *4 (encoding for “:”) followed by the encoded port number. Following is a table of the enc

Página 3 - 1 Welcome

HandyTone-486 User Manual Grandstream Networks, Inc. 11 • Call Flashing. When in conversation, user can also flash to the third party by pressing f

Página 4 - 2 Installation

HandyTone-486 User Manual Grandstream Networks, Inc. 12 1. A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial

Página 5 - 3.1 Safety Compliances

HandyTone-486 User Manual Grandstream Networks, Inc. 13 *70 Disable Call Waiting. (Per Call) *71 Enable Call Waiting (Per Call) *72 Unconditiona

Página 6 - 4 Product Overview

HandyTone-486 User Manual Grandstream Networks, Inc. 14 5.5 Sending and Receiving Fax Grandstream HandyTone series support two modes for Fax over

Página 7 - 4.2 Hardware Specification

HandyTone-486 User Manual Grandstream Networks, Inc. 15 6 Configuration Guide 6.1 Configuring HandyTone-486 WAN IP through Voice Prompt 6.1.1 DH

Página 8 - 5 Basic Operations

HandyTone-486 User Manual Grandstream Networks, Inc. 16 http://HandyTone-IP-Address, where the HandyTone-IP-Address is the WAN IP address of the H

Página 9 - 5.2 Make Phone Calls

HandyTone-486 User Manual Grandstream Networks, Inc. 17 Following are configuration pages End User will see once log in correctly: • Basic Settin

Página 10 - Call Waiting and Flashing

HandyTone-486 User Manual Grandstream Networks, Inc. 18 DMZ IP: Port Forwarding: WAN port 0 LAN IP LAN port 0 Protocol " UDP Only&qu

Página 11 - Attended Transfer

HandyTone-486 User Manual Grandstream Networks, Inc. 19 Time Zone This parameter controls how the displayed date/time will be adjusted according to

Página 12 - 5.3 Call Features

HandyTone-486 User Manual Grandstream Networks, Inc. 2 Table of Contents 1 WELCOME...

Página 13 - PSTN Pass Through/Life Line

HandyTone-486 User Manual Grandstream Networks, Inc. 20 PPPoE Link Up: disabled NAT: detected NAT type is full cone NAT Mapped IP: 70.22.149

Página 14 - LED Light Pattern Indication

HandyTone-486 User Manual Grandstream Networks, Inc. 21 NAT Mapped IP WAN side public IP if connected to LAN of a SOHO router. Other Statistical Sta

Página 15 - 6 Configuration Guide

HandyTone-486 User Manual Grandstream Networks, Inc. 22 LAN Subnet Mask Sets the LAN subnet mask. Default value is 255.255.255.0 LAN DHCP Base IP:

Página 16 - End User Configuration

HandyTone-486 User Manual Grandstream Networks, Inc. 23 Traversal Setting and other miscellaneous configurations. Following is the snap shot of th

Página 17

HandyTone-486 User Manual Grandstream Networks, Inc. 24 Layer 2 QoS: 802.1Q/VLAN Tag 0 802.1p priority value 0(0-7) Use DNS SRV: No Y

Página 18

HandyTone-486 User Manual Grandstream Networks, Inc. 25 Disable Call-Waiting: No Yes Send DTMF: in-audio via RTP (RFC2833) vi

Página 19

HandyTone-486 User Manual Grandstream Networks, Inc. 26 Authentication Password Account information, password for ATA to register to (SIP) servers o

Página 20

HandyTone-486 User Manual Grandstream Networks, Inc. 27 Unregister on Reboot Default is No. If set to yes, the SIP user will be unregistered on reb

Página 21

HandyTone-486 User Manual Grandstream Networks, Inc. 28 Via HTTP Upgrade Server The URL for the web server used for firmware upgrade and configurati

Página 22 - Advanced User Configuration

HandyTone-486 User Manual Grandstream Networks, Inc. 29 PSTN Access Code Default is “*00”. By press the code, user can switch the phone connected to

Página 23

HandyTone-486 User Manual Grandstream Networks, Inc. 3 1 Welcome Congratulations on becoming an owner of HandyTone-486. You made an excellent choi

Página 24

HandyTone-486 User Manual Grandstream Networks, Inc. 30 6.2.4 Saving the Configuration Changes Once a change is made, the user should click the “Up

Página 25

HandyTone-486 User Manual Grandstream Networks, Inc. 31 6.3 Configuration through a Central Server Grandstream HandyTone ATAs can be automatic

Página 26

HandyTone-486 User Manual Grandstream Networks, Inc. 32 7 Software Upgrade 7.1 Upgrade through HTTP To upgrade software, HandyTone ATAs can be co

Página 27

HandyTone-486 User Manual Grandstream Networks, Inc. 33 Once the TFTP server is configured, power cycle the HandyTone ATA to start TFTP upgrade. TF

Página 28

HandyTone-486 User Manual Grandstream Networks, Inc. 34 8 Restore Factory Default Setting Warning: Restore the Factory Default Setting will erase

Página 29

HandyTone-486 User Manual Grandstream Networks, Inc. 4 2 Installation HandyTone-486 Analog Telephone Adaptor is an all-in-one VoIP integrated devic

Página 30

HandyTone-486 User Manual Grandstream Networks, Inc. 5 3 What is Included in the Package The HandyTone-486 package contains: 1) One HandyTone-486

Página 31

HandyTone-486 User Manual Grandstream Networks, Inc. 6 4 Product Overview 4.1 Key Features • Supports SIP 2.0(RFC 3261), TCP/UDP/IP, RTP/RTCP, H

Página 32 - 7 Software Upgrade

HandyTone-486 User Manual Grandstream Networks, Inc. 7 4.2 Hardware Specification The table below describes the features of the model. Model

Página 33

HandyTone-486 User Manual Grandstream Networks, Inc. 8 5 Basic Operations 5.1 Get Familiar with Key Pad and Voice Prompt HandyTone-486 has stored

Página 34

HandyTone-486 User Manual Grandstream Networks, Inc. 9 • ‘*’ functions similar to ‘↓’ key of BT-100 phone to select the next menu option • ‘#’ ret

Comentários a estes Manuais

Sem comentários