
CONNECTING YOUR GXW–400x
Connecting your GXW–400x is easy. Before you begin, please verify the contents of the GXW–400x
package.
EQUIPMENT PACKAGING
Unpack and check all accessories. Equipment included in the package:
• one 12V universal power adapter
• one Ethernet cable
• one device unit
CONNECT THE GXW–400X
Managing the GXW and connecting the unit to the VoIP network is very simple. Follow these four (4)
steps to connect your GXW to the Internet and access the unit’s configuration pages. The GUI pages will
guide you through the remaining steps to set-up your gateway. Examples of the GUI Interfaces can be
downloaded from:
http://www.grandstream.com/GUI/GUI_GXW400x.rar
1. Connect the Power to the GXW-400x unit.
2. Connect an Ethernet cable between the LAN port on GXW-400x to your PC.
3. Your PC will be assigned an IP address like 192.168.2.100
4. Launch web browser and type
http://192.168.2.1 at the address of web browser. This will give you
access to the GXW-400x web server.
FIGURE 1: DIAGRAM OF GXW–400X BACK PANEL
LAN/WAN
RJ-45 Ethernet
Ports
FXS
Ports
Power
Supply
Console
Connection
(PC
connection)
GXW- 400x
PSTN
Line
T
ABLE 1: DEFINITIONS OF THE GXW CONNECTORS
LAN (or PC)
Connect your PC to the LAN to find IP address from your Router/DHCP
Server.
WAN (or LAN)
Connect to the internal LAN network or router.
VIDEO IN
Connection for Analog based Video Surveillance Camera (RCA)
RESET
Factory Reset button. Press for 7 seconds to reset factory default settings.
POWER IN
Power adapter connection
CONSOLE
Console connection for a PC.
FXS1 - FXS8
FXS ports to be connected to physical PSTN lines.
Grandstream Networks, Inc. GXW-400x User Manual Page 5 of 31
Firmware 1.0.0.17 Last Updated: 12/2006
Comentários a estes Manuais