Grandstream Networks HT386 Manual do Utilizador descarregar pdf (Página 17)

Grandstream Networks, Inc. HT-386 User Manual Page 17 of 34

Firmware 1.0.3.64 Last Updated: 2/2007

CONFIGURATION GUIDE

CONFIGURING HT–386 THROUGH VOICE PROMPT

DHCP MODE

Follow Table 3 with voice menu option 01 to enable HT-386 to use DHCP.

TATIC IP MODE

Follow Table 3 with voice menu option 01 to enable HT-386 to use STATIC IP mode, then use option 02,

03, 04 to set up HT-386’s IP, Subnet Mask, Gateway respectively.

TFTP SERVER ADDRESS

Follow Table 3 with voice menu option 06 to configure the IP address of the TFTP server.

IRMWARE SERVER IP ADDRESS

Select voice menu option 13 to configure the IP address of the firmware server.

ONFIGURATION SERVER IP ADDRESS

Select voice menu option 14 to configure the IP address of the configuration server.

PGRADE PROTOCOL

Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose

between TFTP and HTTP.

IRMWARE UPGRADE MODE

Select voice menu option 17 to choose firmware upgrade mode among the following three options:

1) always check, 2) check when pre/suffix changes, and 3) never upgrade

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 33 34

Sem comentários

Grandstream Networks HT386 Manual do Utilizador Página 17